کنترل پنل اعلام حریق Solution F1

محدوده کنترل پنل “Solution F1” ، کنترل پنل های حریق نسل جدید، ماژولار و فوق العاده مدرن است.
این کنترل پنل ها برای مطابقت با استانداردهای بین المللی و برآوردن نیازهای خاص بین المللی در بالاترین سطح تولید شده اند.

Remote Control Panel

این پنل ها شامل ویژگی های جدید متعددی هستند. چندین مورد در security business منحصر به فرد هستند – و آنها را از طریق تجهیزات جامع خود متقاعد می کنند.
بسیاری از ویژگی های اختیاری (با هزینه اضافی) در سایر پنل ها در پیکربندی استاندارد “Solution F1” گنجانده شده است.
این پنل طراحی شده است تا هم از نظر امکانات مختلف پیکربندی و هم از نظر طراحی، یک محصول جهانی و انعطاف پذیر باشد. بنابراین شرایط مناسبی برای همه برنامه های ممکن برآورده می کند.
با توجه به ماژولار بودن برجسته این پنل، می توان آن را کاملاً با تمام نیازهای پیش بینی شده کاربر مطابقت داد.

انعطاف پذیری – به ویژه برای اتصال دتکتور های مختلف – یکی از مهمترین اهداف در طول توسعه این کنترل پنل جدید بود. بدیهی است که این استاندارد برای اتصال تقریباً تمام دتکتورهای مرسوم در بازار استاندارد است ، اما نکته بسیار قابل توجه این است که: پنل های “Solution F1” با جدیدترین دتکتورهای آدرس پذیر آنالوگ Hochiki و Apollo که دو برند بزرگ و شناخته شده در بازار در سراسر جهان است، سازگار هستند.

*Modular, intelligent hybrid fire control panel range

*Supports Hochiki ESP and Apollo XP95 / Discovery detectors

*2 – 18 loops in one standard housing

*Brand new touch control panel

*Graphics LCD module 240 x 64 as standard included on basic model

*Integral Power supply 24 V DC with max. 6.7 A or 4.2 A as standard included

*32 bit high performance CPU

*Flash memory up to 8 MB and RAM memory up to 8 MB

*Many powerful features included

*Configuration software operated via modem or USB interface

*Full redundant main board and full redundant loop cards as options


Solution F1The Reliability
If for certain applications a higher reliability as EN-54 and VdS standards is required – that will be no problem for the “Solution F1” control panel: the Control Processing Unit can be doubled as well as the system boards which are responsible for the communication with the sensors and which passes the information from the detectors to the CPU. So the end user gets a 100 percent redundancy of the whole system. But the R&D people did not stop the ambitious aims for reliability there:
They created a brand new control panel technology – with absolutely no mechanical parts any longer – which is unique in the security business and which has a lot of advantages for the installer as well as for the end user. It contains a pressure sensitive piezo lacquer and does not have to be adjusted. The surface makes a worth-while impression because of its glass like design. This material is resistant against cleansing, there is absolutely no attrition over years and moreover it is very stable against EMC influences.

The product range
The “Solution F1-6“ panel has as standard a 24 V DC power supply with max. current of 4.2 A. The user can connect up to 6 loops – each with 254 loop devices (127 detectors/modules plus 127 loop sounder) – to this panel and can organize a max. of 512 zones. There are three standard housings which should be chosen depending on battery backup requirements.

The bigger model “Solution F1-18” has a 24 V DC power supply with max. current of 6.7 A fitted as standard. This panel can control 18 loops as its maximum. Again there are 3 standard housings available. The selection is dependent on battery space and number of loops needed. This “Solution F1-18” has several more standard features compared with the smaller panel: 1.024 programmable zones, USB host interface, metal rack for 2nd assembly level, interface for optional TFT display, slot for SD card memory and interface for audio codec module.

Both models can be supplied in a 19 inch rack mounting version instead of a standard housing. There are no special adapters or frames necessary because the “Solution F1” is generally compatible to 19 inch housings. The pluggable wiring terminals will be greatly appreciated because the installation will be done very quickly and effectively.
NSC web server-moduleFor software configuration or data analysis by telephone line the technician can connect the panels via modem (analogue or ISDN) with his PC. Therefore you will find a slot at the main board which not only handles the data communication but it provides the power supply for these modems too.

Alternatively the Soliton F1 control panels can be equipped by a web server.


Upgrade possibilities and compatible detectors

The Solution F1 offers a wide range of equipment varieties as well as possible upgrades. You can find detailed information on this as well as on compatible ringbus detectors in our 12-paged brochure:PDF-download brochure The Fire Alarm Control Panel Solution F1 >

Configurator for fire control panel and periphery

As of now the new tool for calculating quotes is available to you. Configure your Solution F1 and compose the desired peripheral equipment, made-to-measure for your customers. You immediately receive an overview of prices that you can use as a basis for your calculations.